Results 1 to 3 of 3

Thread: Empty Pins on ECU Harness

  1. #1
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    15

    Empty Pins on ECU Harness

    Is there a way to program or use the empty pins on the ECU for a wideband? instead of using the A/C pressure switch.
    Can't really find anything online, and wanted to know if anyone had done it. trying to tune a '98 Chevy with a built small block that my buddies dad had built.

    it has a carb cam which draws less vacuum so the VE table will be all screwed up right? that's why we want to tune it

    Any help appreciated

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    The computer itself was never designed for a wideband so it could never use it in that way.

    We can only use the AC pressure circuit or the EGR circuit to log the wideband in the logs so we can create a wideband AFR/Lambda error against the commanded AFR/Lambda.

    Then that error would be applied to the airflow model to correct the fueling in the MAF/VE.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    15
    Damn I thought I was on to something haha, guess not, oh well.
    Thanks for the help