Hi guys,
Can someone take a look at this log. There are things I don't understand. From the 1 to second upshift, the timing is being pulled back before the actual shift and it gets re-introduced and only after that the tranny shifts. Then at 6600 rpm in second gear the timing is being pulled back again and the rpm's fall back to 4300.
the upshift from second gear to third is weird too, I have some slip then no timing pull to engage the third gear.
Also, the TCC slips a lot during the third to fourth transition.
Thanks
wotshifting.hplTranny_tccpressure20%.hpt