Is there a way to speed up downshifts on the 6R80 from say 6th to 2nd for example? My car takes around .8 seconds to command 2nd gear after going WOT.
There are no 6>2 or 5>2 tables so what are used for these?
Mods are in sig.. Thanks
Is there a way to speed up downshifts on the 6R80 from say 6th to 2nd for example? My car takes around .8 seconds to command 2nd gear after going WOT.
There are no 6>2 or 5>2 tables so what are used for these?
Mods are in sig.. Thanks
Last edited by blackbolt22; 01-01-2020 at 09:20 AM.
Knock Retard is the reduction or prevention of knock by lowering ignition timing:
(+) Adding Knock Retard = Reducing Timing. PCM is seeing knock.
(--) Lowering Knock Retard = Increasing Timing. PCM isn't seeing knock.
__________________________________________________ ________
2014 Mustang GT Premium. VMP Gen2R Supercharged with an FTI 3000rpm Converter. JLT, BMR, Steeda, Viking, etc.
Don't fix it if it ain't broken | Maximum effort gets maximum results
There is clutch on on downshift raise the psi or the lbs/s is in time/ torque there is plenty on this in the forum I Have a ford 6R140
Knock Retard is the reduction or prevention of knock by lowering ignition timing:
(+) Adding Knock Retard = Reducing Timing. PCM is seeing knock.
(--) Lowering Knock Retard = Increasing Timing. PCM isn't seeing knock.
__________________________________________________ ________
2014 Mustang GT Premium. VMP Gen2R Supercharged with an FTI 3000rpm Converter. JLT, BMR, Steeda, Viking, etc.
Don't fix it if it ain't broken | Maximum effort gets maximum results