Hello,
i have a 2014 jeep wrangler 3.6 w a sprintex supercharger. Ran fine with the injectors sprintex provided except for rich conditions p/t. Installed 540cc fuel injector clinic injectors, with data. Triple checked to make sure i entered it correctly. It also ran before i entered the injector data with fic injectors installed. Here is the tune file. Not even sure if i attached this correctly smh... EM DYNO TUNE ORIGINAL AND SPARK CHANGES. INJECTOR DATA CHANGED.hpt these injectors are slightly smaller than the ones i took out but was told i can program them to out flow the ones i took out. Do i adjust the startup table? It will almost start but not quite. Im new sorry if this is a novice issue.