Results 1 to 2 of 2

Thread: 2015 mustang whipple calibration scanner issues

  1. #1

    2015 mustang whipple calibration scanner issues

    Hey Guys, not sure what is happening with a 2015 mustang I am trying to tune remotely. When I connect to the vehicle (TeamViewer) I can easily connect but can only display basic OBD parameters. No extended PIDS for ford show up. I disconnected, "repolled for supported parameters", etc. It connects each time just not showing a big list of available pids such as weights, torques, etc.

    Quite sure this is a whipple supplied cal in the vehicle. I can read the calibration no problem.

    Anyone have an idea?

  2. #2
    Advanced Tuner 96gt4.6's Avatar
    Join Date
    Aug 2008
    Location
    Kansas
    Posts
    489
    Sounds like you are running into the exact same thing I did. Here is my thread:

    https://forum.hptuners.com/showthrea...-Advice-Needed

    If so, send the info into support so they can get your CAL ID added into the Editor. After they did mine, it patched the Whipple OS, reflashed, and everything was there and then some for tuning.
    '17 Whipple'd S550
    Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw