I am putting a turbo kit on my 2004 1500 5.3 truck. What Map sensor (s) do I need to use on it? It will be SD only no maf
I am putting a turbo kit on my 2004 1500 5.3 truck. What Map sensor (s) do I need to use on it? It will be SD only no maf
EFI source sells a 3 bar MAP.
Or people run the LS9/ZR1/ZL1/CTSV 3 bar map sensor. Though I believe you have to just swap two pins around on the connector for that one.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
I thought these don't support 3 bar?
They do.
The MAP sensor you run really doesn't matter, so long as the MAP sensor data is correct. You could run a 2 bar MAP sensor on a 3 bar OS or the 3 bar MAP sensor on a 2 bar OS.
Even if your computers OS upgrades only support 2 bar OS's, using the 3 bar sensor is just fine. Then you just have to deal with the fueling table being limited to 14psi but you could still log higher with the 3 bar sensor.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.