ID1300 scaling

[Silspark]

RPM are not stable after installing the ID1300 and put scaled data ( 63.5 are my limit).
with scaling data I doubling the Voltage also I play with Torque EQ with same result , no leak no issues.
usually whats should I change after scaled the injectors



RMT2.3 1300.hpt
RPM p.hpl

[asquinton]

When I scaled my injectors I halved the injector flow, doubled the target stoic A/F ratio, and doubled the IVT temp table on an E40.

[blake-b]

When I scaled my ID1300s, I doubled stoich, halved IFR and IVT

https://forum.hptuners.com/showthrea...7569-IVT-Terms
https://forum.hptuners.com/showthrea...F-IFR-Question

[Silspark]

So i have bring back the injector voltage to stock??

Scale the injector half
Double the stoich
Cut the IVT half

Thats it?

[blake-b]

So i have bring back the injector voltage to stock??

Scale the injector half
Double the stoich
Cut the IVT half

Thats it?

That is all I did. I didn't touch the injector voltage.

[asquinton]

You are right on halving the IVT, sorry for the miss and correcting now.

Cut the IVT half

[lukearmstrong1990]

you have no VE table numbers

nor is the MAF failed correctly

whats your combo? I can write something

[lukearmstrong1990]

RMT2.3 1300 (1) edit.hpt

try that