Results 1 to 5 of 5

Thread: 3 bar map on 5.7 hemi

  1. #1
    Potential Tuner
    Join Date
    Jun 2019
    Posts
    4

    3 bar map on 5.7 hemi

    I'm looking to find out the data that needs to be entered for a specific map sensor I have a mopar map part number 05149056AA. I'm extremely new to hp tuners and pretty much computers as well. I have the mpvi2 and the dodge beginners book. I just cant find any linear or really any data on the map sensor for that matter. Any info would be much appreciated thanks

  2. #2
    Advanced Tuner
    Join Date
    Jun 2010
    Posts
    293
    i have same snsor but check your baro/map on the scanner software with key on engine off
    Attached Images Attached Images

  3. #3
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    873
    Double post.
    Last edited by Homer; 11-14-2019 at 08:14 AM.

  4. #4
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    873
    Have a look here, I think the 3bar caliber transfer functions are also given...post 13.
    https://forum.hptuners.com/showthrea...NEEDED-PLEASE!

  5. #5
    Potential Tuner
    Join Date
    Oct 2020
    Posts
    1
    hello
    i live in france i installed a torqstorm supercharger on my 5.7 challenger rt
    i put 5149056aa srt4 map sensor 3bar

    do you a table to calibrate this ?
    at idle ok but, in accelerate the car don't react speedly