Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27

Thread: HP Tuners Now Supports 08-19 Subaru STI and 08-14 Subaru WRX

  1. #21
    Quote Originally Posted by tomaptuning View Post
    Send support the file and the info read. Probably just a file they haven't had yet.
    We added definitions for all the files we could find, there's going to be some that missed the cut. Any reads that get sent in we'll add definitions for them.

  2. #22
    Tuner
    Join Date
    Mar 2015
    Location
    gippsland
    Posts
    118
    every file i have tried to view in this thread is failing to load definition, unsupported file.
    i am using the very latest 4.5.1078 with mpvi2 connected and internet.
    am i missing something?

  3. #23
    Quote Originally Posted by Johnson Tuning View Post
    Adding IAT sensor scalar so SD can be ran properly would be a start..
    Added. Engine Diagnostics -> General -> Temperature Sensors.

  4. #24
    Potential Tuner
    Join Date
    Oct 2019
    Posts
    5
    My file also wasn't open, I just sent Email to evan.s@hptuners , he fixed it all very shorty.

    THANK YOU EVAN!

  5. #25
    Advanced Tuner robbyredneck's Avatar
    Join Date
    Jan 2010
    Location
    fingerlakes ny
    Posts
    347
    same here. would like to look at this as i am used to open source but would gladly use the stability of hptuners
    04 6.0 silvy china turbo
    87 gn
    03 stroker evo ww
    00 ss camaro

  6. #26
    Potential Tuner
    Join Date
    May 2016
    Posts
    1
    I might have to upgraded to the MPVI2 just for this. I don't like the openecu software

  7. #27
    Potential Tuner
    Join Date
    May 2020
    Posts
    3
    Does anyone have a stock 2016 sti file I can look at? I checked the repo and there is nothing even there for a Subaru in the drop down menu. I would like to see if I can help someone that Subaru will not help reflash to stock.

    Thank you,

    Cory
    Last edited by honesTTwork; 05-08-2020 at 02:23 PM.