Im new to all of this and learning as I go. Yall have been tons of help working through issues. Now that I have an ( I'd say decent running tune) I'm trying to tune VE, but I can't get it to idle at all when I follow ChopperDoc's instructions. I"m sure I'm overlooking something but I can't figure out what. Can someone take a look and let me know what I need to do, ballpark to get this thing to run well enough to tune VE? It runs for like a minute and shut down.
On my "decent running" tune. Its pretty much an 05 Caddy Escalade base tune with some minors here and there. I'm rich at warm-up, rich at the touch of the throttle and then goes to 8 AFR at 70ish % Throttle which is why I was trying to follow the things I've read here about tuning VE first. And while its running, CL STFT are -20 ish. The running log is large and I don't know if useful or not but I figured maybe yall would see something in there to point me in the right direction.
Attachment 94655
Attachment 94656
Attachment 94657
Attachment 94658
This is a 2005 LQ9 stock with CompCams and springs ... 202/212 .500 116 LS