Put a 4.8 together with a cam (585/585 228/230 112) and SD80's. Has a 2bar map installed and the Turbo is plumbed but charge pipe is open so I can get it running. I'm a first time efi tuner using hp tuner. Got it to idle with bannish fuel and a VE table from a sloppy tune I downloaded. Also has a Stock maf on it.
Idles and free revs okay stumbles on recovery but keeps idling.
When I throw it is gear it will keep idling but when I tip in it surges bad and will die after it rolls a few feet. I included my scan, you can see it stall out near the end 3-4 times.
Really not sure where to start, but invested in learning, have read a few books bannish vid's etc... I used the VE from the sloppy tune because I could not get it to start with the stock VE. The sloppy VE has values 50-75% less than the stock VE values so I'm wondering if I need to re-think that move.
Just need a few suggestions so that I can get it rolling so that I can start figuring out the rest of this. Any help appreciated.