Results 1 to 3 of 3

Thread: Segment Swap not available on 2 files with same OSID

  1. #1
    Potential Tuner
    Join Date
    Jun 2007
    Posts
    3

    Segment Swap not available on 2 files with same OSID

    I'm trying to do a segment swap after putting a 4L80E in 97 Tahoe, and have files with the same OSID (16263425). However the Segment Swap option is still greyed out. I've read the sticky for segment swaps, and I thought having the same OSID was the only limitation. Did I miss something?

    Here are screenshots of the OSID, and the hpt files are attached.
    SegmentSwapperDisabled.PNG
    98Silverado16263425.PNG

    Thanks
    Matt
    Attached Files Attached Files

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    As far as I know that is not a function of the vortec computers. You can use it on the LS based P01/P59+ computers.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Potential Tuner
    Join Date
    Jun 2007
    Posts
    3
    Oh bummer. What are my options for the older vortec computers when doing a 4L80 swap? Can I just copy over all the transmission data from the 4L80 to the 4L60 or will there still be other issues?