Results 1 to 4 of 4

Thread: p0731 2013 wrangler

  1. #1
    Tuner in Training
    Join Date
    Oct 2010
    Posts
    29

    p0731 2013 wrangler

    2013 wrangler with 35 in tires. Had a bully dog gt programmer on it. It has had a new tcm, pcm, trans and all the wires have been load tested and
    abs sensors verified. I took the bully dog off and used hp tuners to set tire size and verified it worked by checking the tipm with witech. Anyone
    have any ideas??????

  2. #2
    Tuner in Training
    Join Date
    Oct 2010
    Posts
    29
    all the forums I have read say to get the aev procal, has anyone used this??

  3. #3
    HPT Employee JMoeller@HPTuners's Avatar
    Join Date
    May 2017
    Location
    Phoenix, AZ
    Posts
    2
    Is the correct gear ratio programmed?

  4. #4
    Tuner in Training
    Join Date
    Oct 2010
    Posts
    29
    yes the correct gear ratio