Results 1 to 5 of 5

Thread: 2007 hemi turbo 3 bar setup

  1. #1
    Potential Tuner
    Join Date
    Jun 2019
    Posts
    4

    2007 hemi turbo 3 bar setup

    Is it normal that after I have updated my map linear and offset I don't have anything above 107 kPa on my timing map, or did I miss something? How is it going to know when to start to pull timing under boost? I'm confused that the rest of the maps don't automatically change the scale. Any help would be appreciated thanks.

  2. #2
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    You can right click and choose edit row axis to re-scale the labels. Some of the PCMs have a hard limit of - I think 195kpa? If that is the case, you will just have to deal with it and figure out where you are in the map using a graph while ignoring the labels.

  3. #3
    Potential Tuner
    Join Date
    Jun 2019
    Posts
    4
    Awesome I kind of thought that might be the case thanks again

  4. #4
    If you need help setting it up I can help you out

  5. #5
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    post your tune, you will need to enabled Sensed Map
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161