Results 1 to 4 of 4

Thread: MAP/BARRO Code

  1. #1
    Potential Tuner
    Join Date
    Feb 2019
    Location
    Perth Western Australia
    Posts
    2

    MAP/BARRO Code

    Just fitted up a Magnuson 2300 kit to a 2018 LT1 Camaro and now i keep getting P0106, P1101 and P2227.

    The kit came with a Bosch 3 Bar MAP (Part #0 261 230 185)

    I think ive got the MAP information correct - MAP Sensor Linear 313.09kpa / MAP Sensor Offset -12.30 (Not sure if this info is correct as this is the first GEN V for me)

    Any fitted one of these kits before and had this issue or is my data wrong or is it something else??


    Cheers in advanced

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    whats your MAP and Baro read key on engine off
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Potential Tuner
    Join Date
    Feb 2019
    Location
    Perth Western Australia
    Posts
    2
    MAP and Baro read 101kpa key on engine off

  4. #4
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    change your linear setup

    312.5
    -11.25
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161