I have been tuning my LS2 since I realized putting any add-ons will cause it to need adjustment. Once I put an OTR intake on and upgraded the MAF it started running very lean. When I got HP Tuners I also found the 6.0 was actually tuned for the 04 5.7 engine!?
Anyways I finally got the VE table looking good in SD mode but when I put the adjusted VE table back into the stock tune the long term fuel trims went through the roof. I am using 4.4 version of HP Tuners and have LC-2 WB installed into 1st slot on Pro module. Here are my tune files and log files for your evaluation and am hoping for a little advise as to what went wrong. Thanks much for any advise in this.