Results 1 to 4 of 4

Thread: Gen 3 hemi with zf8 into restomod

  1. #1

    Gen 3 hemi with zf8 into restomod

    Curious if there would be a issue if I pulled a hemi and trans and shifter out. And stuffed it into a 69 with a stand-alone harness. Would there be any issue you think with the trans and engine talking if there?s no body harness???

  2. #2
    Gonna need an abs module to get a speed sensor signal.

  3. #3
    Wher would u pick up the signal from

  4. #4
    It starts are rear wheel abs sensors to abs module then can bus to PCM and TCM.