Results 1 to 3 of 3

Thread: Actually connecting the wires.

  1. #1
    Tuner in Training
    Join Date
    Aug 2019
    Posts
    12

    Actually connecting the wires.

    Ok guys. I just bought the pro link set. Wanna connect up my AEM 30-0300 AFR to the link and start logging. But when I opened the box, there is no actual instructions on making the wire connection. The white and brown wires are listed as analog positive and negative, respectively, for my AEM instructions. But which wires do I connect them to on the pro link cable? I've searched and not found what I was looking. Maybe I'm not searching right. Thanks for any help guys.

  2. #2
    Tuner in Training
    Join Date
    Aug 2019
    Posts
    12
    I guess I may have found the instructions but had to go to the pro link tab and download them. Seems like white AEM goes to red on link. Brown AEM goes to black on link. Anyone confirm please?

  3. #3
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Posts
    599
    For CAN connection: ( VCMScanner version 4.5.1198 Beta or later )

    CANH AEM WHITE/BLACK -> PROLINK ORANGE
    CANL AEM GREEN/BLACK -> PROLINK YELLOW

    For Analog connection:

    Analog+ AEM WHITE -> PROLINK RED
    Analog- AEM BROWN -> PROLINK BLACK


    The Analog on the 30-0300 is really good. But, the CAN connection is ideal.