Results 1 to 5 of 5

Thread: S472 running help

  1. #1
    Tuner in Training
    Join Date
    Jan 2020
    Posts
    13

    S472 running help

    I upgraded from a stock turbo to a ats s472 and I?m running it as a big single and need help with my boost and smoke. And help is appreciated
    Attached Files Attached Files

  2. #2
    Hey that's one of my tunes.. lol. What other mods are done to the truck other than the turbo.

  3. #3
    Tuner in Training
    Join Date
    Jan 2020
    Posts
    13
    Sorry it took so long to see this. Dude i love the tune it woke my truck up a lot.
    Currently just turbo intake and exhaust waiting on my studs valve springs and lift pump to come in the mail

  4. #4
    Did you ever get this figured out? I know it will be tough getting it cleaned up on the bottom end. I have the same issue, only altitude is a big part of my problem.
    2004.5 Cummins.
    Borgwarner 13009097047 s300sxe 63-73 compressor 63/80 super core turbine housing 80mm .83 A/R Twin Scroll Housing,
    50HP BMS/Exergy Injectors
    BD T4 manifold,
    BD CAI,
    5" turbo back exhaust,
    turbosmart ext wastegate,
    BD lift pump with 2 mic filter and h2o separator,
    banks intercooler, Banks intake horn,
    slightly built tranny.......

  5. #5
    Tuner in Training
    Join Date
    Jan 2020
    Posts
    13
    I had a major boost leak. Fixed now makes tons of power,is still pretty Smokey on the low end but spoils fine and cleans up higher in the rpm range