Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: 03 vs 04 cobra scaling

  1. #21
    Quote Originally Posted by zacram97 View Post
    Little late but here is my stock 03 cobra tune. Pulled off my bone stock 03 with the MVPI2
    Never to late! thank you
    2003 Zinc yellow Svt Cobra
    Mods: x pipe/cat back, BBK CAI, 2.8 upper, 91 tune

  2. #22
    Quote Originally Posted by mstang_man View Post
    The cell is moving, it just fill the one cell it doesnt want to travel up and down the ad count/volts
    then you arent logging the right things

  3. #23
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    Quote Originally Posted by mach View Post
    then you arent logging the right things
    i am pretty sure i am logging the whats needed. Math STFT+LTFT and then added the AD counts. can see whats missing. Capture 1.JPG

  4. #24
    Tuner in Training
    Join Date
    Aug 2020
    Posts
    15
    im looking for a stock cobra file. how do i get access?

  5. #25
    Advanced Tuner
    Join Date
    Mar 2010
    Location
    New Orleans, LA
    Posts
    628
    ya boy posted it on page 1

    as far as using an 03/04 cal on an 99-00 ecu like the CVAE7 strategy noted earlier thats not a good idea. Bit mapping is different and it will do funky things.

    For all the 99-early 01s I use CVAF1. Conra GT auto manual v6 doesnt matter just configure it as you need it.

    FBGI0 the euro spec stock strategy for the latest 03/04 cobra cal AMZ2 can be configured for an auto trans and iat2, ic pump, sc bypass, etc... can be enabled or disabled as needed for GTs and V6s etc.. Thats what I use for all late 01-04 cars.