Results 1 to 2 of 2

Thread: Flakey reading / Programming

  1. #1
    Advanced Tuner Programmer's Avatar
    Join Date
    Jul 2007
    Posts
    244

    Flakey reading / Programming

    Something change on the TC-1797 ?

    Boot loader doesn't load or fails part way through, read will fail, have to restart, reflashing that last minute (yikes)...yesterday
    it took 4 hours to successfully reflash.
    On a 2013 I did, I had to pull the HID fuses, then got a good write (finally).

    Haven't had this problem since the very first 2014 5.0L pickup which led to a crapped ECA.
    2009 Cadillac CTS-V 196.7 MPH on the Salt
    Superflow SF600 FlowBench -- Superflow Autodyn 30 Chassis Dyno -- Superflow SF901 Engine Dyno--RaceLogic Emulator -- MikiPro Logic Emulator -- ASNU Injector Flow Bench --

  2. #2
    Advanced Tuner Programmer's Avatar
    Join Date
    Jul 2007
    Posts
    244
    Quote Originally Posted by Programmer View Post
    Something change on the TC-1797 ?

    Boot loader doesn't load or fails part way through, read will fail, have to restart, reflashing that last minute (yikes)...yesterday
    it took 4 hours to successfully reflash.
    On a 2013 I did, I had to pull the HID fuses, then got a good write (finally).

    Haven't had this problem since the very first 2014 5.0L pickup which led to a crapped ECA.
    Looks like it's my interface...I just used my second one and everything works fine. Sheesh...sending it in for repair or replacement again.
    2009 Cadillac CTS-V 196.7 MPH on the Salt
    Superflow SF600 FlowBench -- Superflow Autodyn 30 Chassis Dyno -- Superflow SF901 Engine Dyno--RaceLogic Emulator -- MikiPro Logic Emulator -- ASNU Injector Flow Bench --