ok-have a guy who brought me a vehicle. 82 Chevrolet truck with a 6.0L, 4L80 swap. Vehicle has drive by wire throttle body. When you press the pedal wide open you can see the pedal requesting wot but I only get 50% throttle from the throttle body. I have compared files that I have tuned and it appears nothing in this one should be limiting the throttle to the noted amount. Processor was unlocked and this file is exactly as received from the harness supplier (not my work). It appears that it is a decent starter file. Please help. I have a video of what the throttle is doing which I can upload to my YouTube account if necessary. It appears that the throttle is actually opening 50% (roughly 45 degrees) when the pedal is completely on the floor.