6L80 Shift Adapts

[JLBarstad]

Not tuning anything at this time, but trying to learn some stuff before I do. One thing I wanted to check was the shift adapts in my 6L80. I'm planning to flush the trans, and I want to see if the fresh fluid changes the transmission response. I plan to start optimizing from there, just want to see how much the vehicle "feel" improves, and subsequently understand how much the adapts were impacted by the new fluid first.

Anyone know if you can "read" the adapts? I already read the controller, and all the options for modifying the adapts was in there, but it only appeared (to my untrained eye) to provide the range, not necessarily the current value.

Thanks in advance!

[Black00TA]

I'm not sure if the VCM Scanner has the ability to view this information. I have seen it on some Autel hardware, it was displayed in my situation on my 6L80 as a negative "torque" figure of ( -40 )