Results 1 to 3 of 3

Thread: Tuning for air intake errors

  1. #1
    Tuner
    Join Date
    Apr 2021
    Location
    MD
    Posts
    51

    Tuning for air intake errors

    When moving to more air I am finding we are getting some errors here and there like p222b.

    I was thinking it is related to the aircharge conversion.

  2. #2
    Advanced Tuner
    Join Date
    Jan 2022
    Location
    Southern California
    Posts
    365
    I've yet to see that code, and I get a lotta codes. Barometric right? I don't even know where that sensor is located but I'd assume it would just be sitting somewhere in the eng bay, not touching the engine? So you're saying the code trips at full throttle or?
    '16 E550 Coupe RWD - C207.373 / M278.922 / MED17.7.3 / 722.909

  3. #3
    Advanced Tuner outlaw_50's Avatar
    Join Date
    Nov 2020
    Location
    United Arab Emirates, AlAin
    Posts
    204
    To fix the issue,

    the sensors located on the Air Filter Box are called Barometric Pressure Sensors most people tend to think they are MAF sensors which is on that case not correct !! As these platforms operates on MAP sensors and getting feeds from Baro sensors to calculate right amount of boost.

    I would suggest whenever replacing Air Intakes or Spark Plugs to replace them too as over time they may function but loose the ability to send correct signals to the ECU which cause P222b or loss of boost.
    Xstages Motorsport

    Tuning inquiries:

    ECU, TCU, CPC Online Tuning
    Whatsapp: +971503383340
    Email: [email protected]
    Insta: @xstages.motorsport
    www.xstages.com