Just completed installing heads, cam, Supercharger (10-12psi), LS2-90mm/LSX and other goodies on a 427 stroker. Using 72lb injectors. Looking for approximate IFR settings to safely start this thing.
I've tried several of the spreadsheets out there and they are either in g/sec or lb/hr. Just need something to get started then tune.
Thanks
Joe Santacroce
98 Black/Black A4 Coupe
Cam, 3.42's, TPIS Headers,
Random Tech Cats, Yank 3600 TC,
FLT Tranny, 150hp NX Shot
81 - Project FrankenSport
SRIII Tube Chassis, C4 Suspension,
QA1 Coilovers, Dana 44 w/3.90's,
T56 6spd, Corbeaus, Tubbed,
Blown Z06 Engine, SW Headers/Sidepipes
The one redhardsupra has on his site is very good. I believe the link is in our sticky here.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Couldn't find it, could you link it here? Thanks.
its a sticky 1 post up where it says INJECTOR SPREAD SHEET http://www.hptuners.com/forum/showthread.php?t=4742
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
yeah that sheet works well, I sent that to him a while ago to host so people can use it.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Reply With Quote