Results 1 to 3 of 3

Thread: Gen4- How to command open loop idle!?

  1. #1
    Tuner
    Join Date
    Feb 2013
    Location
    glennville ga
    Posts
    168

    Gen4- How to command open loop idle!?

    I have done this numerous times on the gen3 setups. I cant seem to make the gen4 setups idle in open loop. Im tuning a full bolt on silverado with a pretty big cam. Truck idles amazing when i force open loop with scanner. I just cant seem to make it stay in open loop with the tune.

    I have pe set to:

    40kpa enable
    0% tps enable (i even tried 2% no luck)
    1.00 afr commanded
    No delay with 2.000 enrichment rate

    I looked and disabled all the other normal stuff like stft openloop (which gen4 doesnt have) i even disabled ltft. No luck!

    Is there a trick im missing? I know i can disable the closed loop enable temp but the would make for a full open loop tune. I just want it at idle like the older gen3 setups. Any help is greatly appreciated! Thanks.
    2000 silverado rcsb lq4/4l80e. Custom s480 turbo setup. 93oct meth injected. SD Tuned by me.

    2007 tbss ls2/4l80e. Nitrous!!! MAF Only Tuned by me.

  2. #2
    Tuner
    Join Date
    Feb 2013
    Location
    glennville ga
    Posts
    168
    Figured it out. Thanks.

  3. #3
    I've been wondering about this also. What was the trick? I've been playing with it for some time.