Hello All,
I recently got my build together and got the idle calibration pretty dialed in. The only issue is the very first cold crank is very long. Any cold start after that, and the motor immediately fires. I've included a log file that shows the very first long key crank event, I let the engine run for ~10 seconds, and then after its off for a few seconds, I crank it again and it immediately fires. I am trying to figure out what tables need adjustment for the very first crank event after the car has been sitting for a while. I've attached my log, config, and tune file. The car is a 2002 Trans AM, LS1, 228/232 .600"/.600", 112 LSA CAM, 799 heads, full exhaust.
Thanks in advance!
first_cks_2nd_start_quick_fire.hpl02_ws6_Cam_Startup.hptAutoCross_r1.Layout.xml