Hey guys, I've been racking my brain trying to figure out what I'm missing here. I did the Texas Speed DoD delete with a stock non DoD cam and after turning DoD off in the file, setting the PRNDL and gear to disabled under DoD, not reporting error on any of the DoD cylinders or activations, and multiple reflashes I still get half power as soon as I apply any throttle, if I let the truck sit idle it will have no issue.
Truck is a 2009 GMC Sierra w/ 5.3 non VVT and 120k miles, all stock just deleted the DoD.
I will call HPTuners in an hour or so to see if they have any input here, but I feel like I've covered all of my bases and still I get cylinders 1, 4 & 6 activation circuit/open but there is no error reported on cylinder 7, which is weird because it is also a DoD cylinder and all 4 are set to not report errors or set SES light.
Any insight is appreciated, file attached for reference. Dad Truck- TQ management, throttle, DoD off 1.hpt