I use hptuners for my gto just fine but i tried to see what i could do on my dads 2001 durango and i got everything hooked up key on, type in vin, select jtec+ it reads the file, im able to save and everything then just gives me an error after that, wont allow me to view anything with the tune.File not supported, definition failed to load. The Scanner doesnt work either, am i missing something? i know its a supported vehicle and i have the mpvi2.
06 GTO LS3 416-Callies Compstar Crank\Rods-SRP Pistons-All ARP-93/E-85-11.28:1 CR-Johnson Lifters-Steve Morris/Trend Pushrods-Comp Rockers- BTR .685 Spring Kit-Manley Valves-SPS Haymaker Heads-Ed Curtis Spec CompCams 646\616 254\240 115-DW 300-Return Fuel System-Aeromotive FPR-Deka 80s-NW102-Holley Sniper low pro-SLP 25% Underdrive Pulley-Melling 10-296-Kooks 1 7\8, Magnaflow Comp 3"-Duspeed OTR-Mike Norris/Earls Catch Can-Earls 260GPH Fuel Filter-Revshift Mounts.
I would open a support ticket from HP tuners. I know a few people have had trouble with the jtec pcm.
Are you on the Beta software? I was having issues getting into one as well. The Beta software gave me access.
Nick Skaats
Skaats Precision Motorsports
Ask nskaats said, download the VCM Editor BETA software then "gather" info & read...it worked for me on a 2002 JTEC+ PCM.
Dodge Dakota R/T 383 Turbo T56 Magnum
i agree.must be beta and have fun! quite a learning curve with trial and error but fun
16 mkx
09 mb 320 coupe
02 dodge dakota r/t 5.9
which is my latest toy to tune
Reply With Quote