Results 1 to 7 of 7

Thread: 10R80 increasing shift pressure

  1. #1
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    482

    10R80 increasing shift pressure

    what a good increase amount in line pressure for shifts-- stock pressures are 261 whats a good amount to add on top of that pressure ?
    some tunes I have seen have added about 15% increase what the best amount to add ? safely

  2. #2
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    482
    ? No one again

  3. #3
    Advanced Tuner JaegerWrenching's Avatar
    Join Date
    Jun 2018
    Location
    Albuquerque New Mexico
    Posts
    465
    Quote Originally Posted by paulsmithsr View Post
    ? No one again
    I think stock pressure is good if tuned well.

  4. #4
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    110
    300 is as high as I go with and I haven?t had any issues

  5. #5
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    482
    Thanks for response

  6. #6
    Tuner
    Join Date
    Sep 2018
    Location
    US
    Posts
    101
    Paul, in Shift Properties Tab, Inertia Phase Tab, all the way to the left in Upshift Multi (not the alts) I lower the numbers in the highest pressure on the bottom right to .30-.50 for the bottom couple rows and it firms up the shifts nicely.

  7. #7
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    482
    Thanks will try