I havent been able to figure out why I keep going really rich at top end I have made many ,many adjustments to the Ve table and boost enrichment with no noticeable changes when logging afr err. could it be my boost ref reg causing to higher fueling? Or could it be a map sensor not reading correctly or just my tune is that messed up?
here is a sceen shot of the log incase it cant be seen in the log.
Screenshot 2020-11-29 203528.png
second for some reason I can not get the trans to 60ft im thinking i have a setting int the trans tune that is not allowing to put down the power? I cant get better than a 1.91 60ft leaving any where from 2900-4200 rpm.
please ask if there is any other info needed
also can I use a 4 or 5 bar map sensor with the 3 bar os
6.0L 9:1 comp
btr stage 3 turbo cam
823 rec port Ls3 heads
vsr 88mm t6 turbo
btr intake 102mm tb
160 lb ID injectors
twin areomotive 340lph in take pumps
aeromotive boost ref regulator
boost leash boost controller
innovative wb
Built 4L80e late model
D3 T brake
triple billet triple lock up 10" race converter 4000 stall