I need somebody in the LA County area who owns a 2003 Duramax to do some testing on the RTT (real time tuning) code. This also includes the dual calibration option.
You must be willing to run the truck on a rear wheel dyno and put up with lots of boring Q/A testing. I prefer this be a local shop.
Expected test period is 1 week from now with a duration of 1-2 weeks.
PM me with your information if you are interested. The closer to Santa Clarita you are, the better.
-Ken
Ken,
Why does it need to be 2003? I know two Duramaxes, one is a 2001 and the other is a 2006.
Last edited by 12secSS; 10-06-2006 at 04:36 PM.
Originally Posted by 12secSS
Anything that has the 15189044 operating system. That is the one I wrote the initial code for. So unless the beta tester has a way to determine this, I just posted for an 03.
-Ken
If I did not have my kids, I would drive out there and take a couple week vacation.
If you cannot find someone out there, I would put you up for a couple of weeks, and there is a guy 30 seconds from me with a dyno that we could probably make use of.
Jon
2003 Chevy LB7 Duramax/Allison
4" MBRP exhaust, Pricol EGT & Boost Guage, HP tuning
Westin platinum series bars, access cover, bed rug, drawtite hidden gooseneck receiver, 265/75R16 Michellin M/S LTX Load range E
On the way, Kennedy boost valve
In the works, Kennedy airbox mod
2006 Harley Davidson Wide Glide
Full stage one (Air cleaner, pipes, tune)
2004 Pontiac GTO 346 CI with CAI, Long Tubes, Cam and tune, 390RWHP - Traded in
Stop by the shop... Shop truck is an 03.
Doug
Always Support Our Troops!
Done deal. Thanks Doug.
-Ken
Reply With Quote