I need somebody in the LA County area who owns a 2003 Duramax to do some testing on the RTT (real time tuning) code. This also includes the dual calibration option.
You must be willing to run the truck on a rear wheel dyno and put up with lots of boring Q/A testing. I prefer this be a local shop.
Expected test period is 1 week from now with a duration of 1-2 weeks.
PM me with your information if you are interested. The closer to Santa Clarita you are, the better.
-Ken
Ken,
Why does it need to be 2003? I know two Duramaxes, one is a 2001 and the other is a 2006.
Last edited by 12secSS; 10-06-2006 at 04:36 PM.
Originally Posted by 12secSS
Anything that has the 15189044 operating system. That is the one I wrote the initial code for. So unless the beta tester has a way to determine this, I just posted for an 03.
-Ken
If I did not have my kids, I would drive out there and take a couple week vacation.
If you cannot find someone out there, I would put you up for a couple of weeks, and there is a guy 30 seconds from me with a dyno that we could probably make use of.
Jon
2012 Ram 3500 6.7 Cummins with Banks CAI, intake tubes, intake horn, grid heater/EGR/DEF delete, 4" Straight pipe
Stop by the shop... Shop truck is an 03.
Doug
Always Support Our Troops!
Done deal. Thanks Doug.
-Ken
Reply With Quote