Results 1 to 6 of 6

Thread: Factory flex fuel dodge, Chrysler, Jeep

  1. #1
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    2,283

    Factory flex fuel dodge, Chrysler, Jeep

    Had a factory FF file about 2 weeks ago and I?m not able to locate it. Building my first FF hellcat and just wanted to double check some values!!


    Any help would be appreciated

    Email Tunes, PM me for more info
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  2. #2
    Potential Tuner
    Join Date
    May 2014
    Posts
    1
    I'm getting started on my first one as well. Have you been able to make progress on yours?

  3. #3
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    2,283
    Finished it tonight!! Works great!! 93 octane showed anywhere between 0-8% alcohols percent which is correct..

    We added 5 gallons at a time (got 93 on 1/8 tank before adding alcohol)
    Alcohol ended up around 77-82% by end of tune session... about right considering little bit of gas in tank!!

    Rockets, didn’t dyno it, but probably 80rwhp gain!!

    Email Tunes, PM me for more info
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  4. #4
    Tuner in Training
    Join Date
    Apr 2011
    Posts
    24
    So there is a factory flex file fir HC's? Are you able to share it as ive never seen it.

  5. #5
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    2,283
    Hellcats are not FF from the factory, however there is a FF patch!! In the warning, HP tuner states it needs “tuned” VERY TRUE... took a ton of custom programming, axis edits and scaling to make correct...

    No offense to anyone, but not giving this file away for free

    Email Tunes, PM me for more info
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  6. #6
    Tuner in Training
    Join Date
    Apr 2011
    Posts
    24
    Sorry I misunderstood, I thought u meant there was a factory Flex file we could look at and use as a base sw