Results 1 to 3 of 3

Thread: I am in lahabra looking for a H.P. tuner

  1. #1
    Potential Tuner
    Join Date
    Feb 2020
    Posts
    3

    I am in lahabra looking for a H.P. tuner

    Hello all, I have a sand rail with a 2005 LS 2 6.0 iron block mild cam, stock intake, injectors , ecm , it has H.P. gunners on it. It runs but the guy helping me is not getting it. 40 plus runs and still I have issues,
    So there is no thermostat, short headers to a cross over muffler and o2 sensors in collectors, fly by wire.
    It starts hot or cold right to 2500-3200 rpm then slowly comes down and back fires, has a flat spot at 4-5 k
    Please see attachments, AFR drops and he cannot fix it.
    What I am looking for is a way to get it worked on, I will test and return, I cannot keep paying for Dyno time. Is that possible?
    I am not afraid to drive it locally either
    So my problems are,
    Start up, and a flat spot
    Can you guys recommend someone in the Orange County , LA county , area that can tune the ecu, look at all the timing and take out what ever, put in the good stuff and help me out?
    I appreciate it, NGK 6, new plugs and wires, stock coils , 91 oxtane,
    Thanks in advance I am in la habra

  2. #2
    Tuner in Training WAcord's Avatar
    Join Date
    Mar 2019
    Location
    Arkansas
    Posts
    21
    post your tune and log

  3. #3
    Potential Tuner
    Join Date
    Feb 2020
    Posts
    3

    Post my data is not possible

    Quote Originally Posted by WAcord View Post
    post your tune and log
    I tried to place the one pic I had and the site did not take a jpeg, btw I am not asking for analysis
    I am asking for a good tuner near me in lahabra, California
    If you know someone worth there salt, I would appreciate the info for sure
    Thanks in advance