-
Potential Tuner
I am in lahabra looking for a H.P. tuner
Hello all, I have a sand rail with a 2005 LS 2 6.0 iron block mild cam, stock intake, injectors , ecm , it has H.P. gunners on it. It runs but the guy helping me is not getting it. 40 plus runs and still I have issues,
So there is no thermostat, short headers to a cross over muffler and o2 sensors in collectors, fly by wire.
It starts hot or cold right to 2500-3200 rpm then slowly comes down and back fires, has a flat spot at 4-5 k
Please see attachments, AFR drops and he cannot fix it.
What I am looking for is a way to get it worked on, I will test and return, I cannot keep paying for Dyno time. Is that possible?
I am not afraid to drive it locally either
So my problems are,
Start up, and a flat spot
Can you guys recommend someone in the Orange County , LA county , area that can tune the ecu, look at all the timing and take out what ever, put in the good stuff and help me out?
I appreciate it, NGK 6, new plugs and wires, stock coils , 91 oxtane,
Thanks in advance I am in la habra
-
Tuner in Training
-
Potential Tuner
Post my data is not possible
Originally Posted by
WAcord
post your tune and log
I tried to place the one pic I had and the site did not take a jpeg, btw I am not asking for analysis
I am asking for a good tuner near me in lahabra, California
If you know someone worth there salt, I would appreciate the info for sure
Thanks in advance