Results 1 to 2 of 2

Thread: Swapping LS9 cam to BTR stage 3 turbo cam

  1. #1

    Swapping LS9 cam to BTR stage 3 turbo cam

    I am swapping my LS9 cam to a BTR stage 3 cam turbo cam. I just want to be ahead of the game for start up, I have a 6.0 w/6.2 heads , 92mm tb, ID 160# injectors. I have been running SD for the last 2 years w 78mm turbo, but i am also upgrading the turbo to a VSR 80mm billet/ ball bearing.

    My question is what adjustment should i make to my settings to make it easier for tuning for the cam? I know I will have to work on the SD tune Im just looking for advice for the cam.
    Attached Files Attached Files

  2. #2
    Advanced Tuner
    Join Date
    Jun 2015
    Posts
    253
    your spark table looks pretty all over the place and you open loop eq is also prety wacked looking