Have anyone extended the cables to the WB on the LC-1? That would make it alot easier to move it from car to car....
Have anyone extended the cables to the WB on the LC-1? That would make it alot easier to move it from car to car....
Black Pontiac Trans Am WS.7- Runs on E85
And soon to be powered by Twin Turbos.
How to run your LS1 on E85
yes, pleanty have.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
I guess there isnĀ“t any "plug and play" cables to buyOriginally Posted by WS6FirebirdTA00
Black Pontiac Trans Am WS.7- Runs on E85
And soon to be powered by Twin Turbos.
How to run your LS1 on E85
no you woudl have to rig up your own thing
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
ok... thanks.
Black Pontiac Trans Am WS.7- Runs on E85
And soon to be powered by Twin Turbos.
How to run your LS1 on E85
Just buy some weather-packed connectors, and make a few different length extention cables. then pick the size you need each time. just a theory.
Buy an LM-1 extension cable from innovate and then find some to send you a dead LC-1 o2 sensor and cut the pigtail off of it and splice it into the round end of the LM-1 extension cable after you cut it off.... Walaa!