Results 1 to 2 of 2

Thread: MPVI1 will not connect with scanner or editor

  1. #1
    Tuner
    Join Date
    Mar 2010
    Location
    Belton, Missouri
    Posts
    92

    MPVI1 will not connect with scanner or editor

    I have an MPVI1 that will not connect with the scanner or editor. I am getting the "Validate cable licenses failed Error F0." I have tried new cables and Versions 2.24, 4.4. and 4.4 Beta with no luck. I have also tried another PC. Any suggestions? I have seen this error before with my old MPVI1 and would get it occasionally. I never found a true explanation for it. I primarily use my MPVI2 but picked the MPVI1 to scan a vehicle that evidently can't be scanned with the MPVI2. I am having trouble getting any detailed response through HPTuners and they have been AWOL for 3 days. Any info would be appreciated.

    Thanks.

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    likely a hardware issue with the MPVI1 in question and your only option would be to upgrade it to an MPVI2 or combine the licenses onto your current MPVI2.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"