Results 1 to 4 of 4

Thread: PassKey3 Disable

  1. #1
    Potential Tuner
    Join Date
    May 2017
    Posts
    1

    PassKey3 Disable

    Working on a 2004 Pont Grand AM Se w 2.2L A/T Anyone know for sure if the HP Tuners can successfully disable VTD in this application? I don't want to spend 100 bucks to find it does not work. Over the years I have done many theft disables , but that was with TunerCats software. TC has no support for this application.

  2. #2
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    I can only find a sample file for that with a 3.4L, but there the only options are VATS: PWM or Serial. No option for Disable or None.

  3. #3
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    I helped with a dirt track cavalier with the 2.2 that was like a 2002ish I think. Not sure if they run the same computer as the grand am though. I was able to disable the DTC's for the vats system and it ran no problem. If someone had a stock file I could see if they are the same.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  4. #4
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    The 3.4L uses a P04, is the Cavalier 2.2 P11 likely to be the same/similar enough? If it is, that one has VATS Enable/Disable controls.