Results 1 to 7 of 7

Thread: How to data log 5r110

  1. #1

    How to data log 5r110

    How or can I data log the tcm, shift points, pressures etc on Ford 5r110. Trying to tune trans to work with Cummins.

  2. #2
    Advanced Tuner JaegerWrenching's Avatar
    Join Date
    Jun 2018
    Location
    Albuquerque New Mexico
    Posts
    465
    IN the scanner hit the vehicle icon to connect, once connected but not logging open the vehicle drop down and click on repoll for supported parameters and then look for your trans PIDs and see if that works.

  3. #3
    Thank you I will try that and see if it works.

  4. #4
    Still no luck after re polling. Only thing itll bring up regarding transmission is control module voltage

  5. #5
    Ok, had to update software to the new Beta version. Now its reading and I'm finding the missing pids. Now have to figure out what I need to monitor in order to fix trans tuning.

  6. #6
    Quote Originally Posted by Silver64 View Post
    Ok, had to update software to the new Beta version. Now its reading and I'm finding the missing pids. Now have to figure out what I need to monitor in order to fix trans tuning.
    did you get this working?

  7. #7
    [QUOTE=guy-ffc;622447]did you get this working?[/QUOT
    No, I gave up on trying to get it to work. Im using an sct x4 which has all he pids for trans data log.