Hey guys, I have a copy of my most recent tune file and data log. The jeep is still not revving up and falling on its face when the jeep is in drive or reverse. Revs up pretty good in park or neutral and idles pretty well in all gears. It is possible due to my shifter it is trying to start in 2nd, but moves fine at idle and should still be able to rev up especially since once I got some decent speed out of it. This is still a th400 with no electronics to the computer. Also, does still need some throttle to start and for the first 30 seconds until it stabilizes. Revs up good and stays running too, but RPMs get pretty low. I am totally stumped on the situation for drive and reverse not revving up no matter how I feather the throttle it seems to hit a limiter of some sorts when under a load.
Jeep 4-3 #2.hplJeep file idle updated (2)-Newest.hpt