Ok long story short. I bought a 2007 Z06 with an ECS blower setup on it 3 years ago that had a blown LS7. I built a LSX to the hilt and kept the same blower set up on it. At the time I was running 8-9 psi of boost. The car already had a 2bar SD tune in it. So it worked fine with my build and some tweaking. Well...... I have done a LOT of mods since then and now put a Novi 2200 with a 3” pulley on so my boost is over 15 psi so I have to go to a 3 bar OS but don?t have the original tune. I downloaded a stock Z06 E38 tune from the repository but it doesn’t have 3bar capability either. Any help would be great. If there are questions pleas shoot me a PM or respond here. I did a search but looks like the other ones that come up are for earlier versions oh HP tuners. Here is kinda the break down of my money pit:
LSX 427 block
Cali dragon slayer crank
Texas Speed pistons and H beam rods
Custom ground blower cam
Re worked heads
Stock but ported intake
FIC 1650 injectors
E85 sensor
Ally Meth injection
ECS Novi 2200 blower 3? pulley
ATI Balancer
Monster triple disk clutch
Walbro 450 fuel pump
I?m sure I?m forgetting something but you get the idea!
Brandon