first off I am new to the hp tuner V2 and learning how it all works. Any help would be appreciated. I may ask a lot of questions, sorry and please bear with me. thx.
Now to the Info.
06 300c SRT8
installed a small Crower cam
Car starts up, idle surges then stalls.
where and what do I need to change to get idle issue corrected?
I am trying to just get it moving and idling to break cam in and get old gas out before I take it to go get tuned.
thank you for any help
post up your tune, I'll set you up with a base
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
That is friggn AWESOME Mep_q8 !! tune right now is completely stock. do you want me to post up some data log or what the stock tune is?
here is the stock tune i downloaded from car
this is the data log i made for start up and stall
contact me on my email [email protected] i do alot of 5.7 and 6.1 i can help you
looking through some other peoples tunes, i notice alot of tables i can not find in my suite for fueling. Are these tables you make yourself or am i not looking in the right spots? i kinda know what i need to do, just dont want to mess around in places i shouldnt be. thx
Last edited by iron_murt; 04-04-2020 at 01:48 PM.
Great, replied to email!Originally Posted by iron_murt
Last edited by Mep_q8; 04-04-2020 at 02:37 PM.
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
here is the revised data log. it idles but still stalls in gear. have to hold throttle to get it to stay running in gear. what do i need to change?
Try writing the minimun spark base table from 416rpm to 800rpm all the way down to 10 degre and test its supose to work better
then the part throttle table do the same thing only for testing one change at time
i have a 6.1 cammed tune [email protected]
If you need a tune hmu. Demigod tuning on fb
Reply With Quote