Hola HP tuner magicians, any input on the following issues?
1. Inaccurate data logs? Having some trouble with VCM scanner version 4.4.2 recording data correctly. For example, when I go WOT with key on, engine off, tps registers 100%. Not the case when doing a pull. Another issue is map reading different from my boost gauge. It shows 100 kpa KOEO and I am 99% sure it?s scaled correctly.
2. Truck is a total dog off the line and out of boost. It revs kind of sluggish too for what it is, shows hints of snappiness when cold. I have been daily driving it for a while with no issues, just feel like there is a bit more performance out there.
3. Rear gearing for stick rigs? Currently running a TR6060 manual with the .50 OD 6th gear. With 3.50 rear gears, can?t use 6th gear under 90 mph. If I step up to a 4.56, 6th gear will be totally usable, but with 1-3 be stupid? Also, could this be contributing to my dog like take off?
Truck set up is as follows:
1970 Ford f100 swb 3700lbs
P59 OL speed density 3 bar map
LQ4, stage 2 BTR turbo cam
LS6 intake with 92mm China tb (new tps and iac)
Sep 1500 injectors
1.32 Borg S475
Tr6060 6 speed - 3.50 rear gear and 27.3 tall tire
Pump gas
f100 9.0 ve.hptf100pull2.hplpull1.hpl
Any input, opinions or good jabs at my sucky tune welcome!