Hello
I have a 2016 Mustang GT with Whipple supercharger and I'm trying to add fuel pressure into my list of channels to data log at the track. I purchased a fuel pressure sensor and gauge (ATM-3363) which has 3 signal wires, a 12v switched power, and a ground.
I would like to know what signal wires from the sensor I should connect to the ProLink, and whether or not the Pro Link requires a 12v power and ground? Also, I would like to know what the signal curve in volts represents in PSI of fuel pressure (e.g. I need to translate the incoming value of V to PSI).
Please advise, thank you!
Mario