Results 1 to 5 of 5

Thread: C7Z high RPM pulling power????

  1. #1

    C7Z high RPM pulling power????

    I'm having an issue with a C7Z. Pulls are relatively clean, however in higher RPM's, it's pulling power - closing ETC and changing target fuel EQ. Below is a log and the tune file. Can anyone help me decipher why around 6300 RPM it changes what I have set in the tune?
    Attached Files Attached Files

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    The commanded AFR is changing to your COT setting of 1.23 in the max enrichment table. Not sure if that closes the throttle too.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,371
    You same guy posting on corvette forum?

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  4. #4
    @5FDP - I will check that out. Car has no cats. I clearly missed disabling that.

    @Ben Charles - No
    Last edited by kjlindgr; 04-05-2020 at 09:42 AM.

  5. #5
    It was the COT setting. Thanks 5FDP!!