Greetings to all. There is a jeep wrangler with a 5.7 engine and a580 automatic transmission. Long tuned the gearbox for pairs 4.3 and 34.6 wheels. The car weighs 2700kg. I attach the most successful option. Now installed Magnuson TVS2300 Supercharger. Who has ready-made solutions for 5.7, which I can adjust for myself. And where to get reference data such as:
Maximum airflow
MAT Blend Factor
Barometric Pressure Learning Maximum Delta Throttle
Intake manifold volume
ETC Throttle Body Airflow
ETC Minimum Ph
Desired Throttle Small Range
Desired Throttle Large Range
Desired Throttle Pedal Follower
Pressure Ratio, Pressure Ratio Turbo Max (I will expose 2400 for a start)
FA Stoich
Injector Pulse Width vs. Fuel mass
Fuel Mass vs. Injector Pulse Width
entire Startup Inj PW section
FA Ratio Max, FA Ratio Min
FA Cold Enrich
Power Enrich section
driver demand
How to calculate Volumetric efficiency, whether to include a neural network? Still interested in calculating Part Throttle Spark and WOT Spark and WOT Spark Lockpin and WOT Thermal. Base correction how much delay is better? It is not clear how to calculate the Torque / Airflow Factor table. I'm not really dumb and I'm not looking for freebies. I want to discuss with more competent guys and hear the opinions of different parties. Thank you for attention.
P.S.: Where similar solutions are for sale?
5.7 nag1, 4,3 34,6.hpt