Hi guys and girls, can someone point me in the right direction in finding the Tap shift tables as i would like to be able to select 1st gear when i want to, as i almost have to come to a stop for it to grab first.
When off road i'm offroad im normally in Low range and tapping through the gears, 3rd to 2nd does it when asked but 2nd to 1st it goes into like neutral until i come to a stop and drops into 1st...
Screenshot
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
Originally Posted by Lakegoat
Thanks for sharing that but it didnt work. still wont shift down to first gear using tap shift..
That was supposed to give you the location of the tap tables, not fix your problem.
2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
2013 Silverado 5.3, 6L80k 8.8
Does your manual mode still work like stock or did you switch it over to TUTD? With my truck in TUTD I can shift down to 1st at any reasonable speed, at least I tried it at 20mph in 2wd, could be different in 4lo.
Under the Shift General tab, enable TUTD, and set the range active to D4. I like this setup better anyway because it will hold the gear no matter my pedal position.
2014 Silverado L83 | Knockoff S369 Turbo | LT1 Fuel Pump and Injectors | MAST L84 Port Intake | MS3Pro Secondary Fuel Computer
Reply With Quote