Results 1 to 3 of 3

Thread: Aem 30-2130-75

  1. #1

    Aem 30-2130-75

    I have an AEM 30-2130-75 5 bar pressure sensor hooked up using 5v and its reading 1.20psi with engine off.
    I check atmospheric pressure in my area and its 29.91inhg which should be 14.69psi. I selected the same sensor in the transform selector in the scanner. Any thoughts?
    user defined shows that its .05333v = -24.075psi.

    the sheet that came with the sensor shows .5v = -14.7psi

    Any thoughts?

  2. #2
    aem 30-2130-75.PNG

    figured it out. had to make my own user defined setting

  3. #3
    thought I figured it out. something still isn't correct. I'll keep updating just in case someone has the same issues